|
Help!
Apr 1, 2006 11:49:51 GMT 1
Post by adamlondonuk on Apr 1, 2006 11:49:51 GMT 1
Hi people, im a new engineer and im working tongiht mixing for 5 bands, my problem is as i sound check each band im gonna need to mark down there levels for later, is there a pre made sheet i get of the web for this anywhere? or any better ideas, cheers
|
|
|
Help!
Apr 1, 2006 12:55:38 GMT 1
Post by andy on Apr 1, 2006 12:55:38 GMT 1
If you know what desk you are using to mix the bands go to the manufactures website and see if you can get the channel markup sheet. If not you could make your own, or a strip of white tape at the top of the desk to mark your gains. Hope this helps dude heres a link to the one i use for tuts you might be able to use it, click markup sheet! www.soundcraft.co.uk/product_sheet.asp?product_id=7
|
|
|
Help!
Apr 2, 2006 21:34:44 GMT 1
Post by Rich06 on Apr 2, 2006 21:34:44 GMT 1
Mate best thing get your camera phone out or your digital camera out and take a few snaps than zoom in and you just saved yourself alot of grief
|
|
|
Help!
Apr 3, 2006 12:48:16 GMT 1
Post by Guesty on Apr 3, 2006 12:48:16 GMT 1
Digitals cameras work ok but if its duel concentric pots it can get tricky
|
|