|
Post by John Bell on May 12, 2006 16:29:14 GMT 1
Hi all, You may have read in my posting, about this years Cliffe Music Fest. charity event, that I would like to be able to control my stage lighting rig from alongside FOH, instead of using my Ryger controllers next to the stage. I am looking at borrowing or hiring, some dimmer packs and a 24 channel DMX lighting desk, to control my 22x par56 and 2x NJD Quartet300 rig, as I can't afford to purchase them this year, after the PA upgrade. My existing lighting cables are all Bulgin and I will also need a 30mtr DMX cable, linking cables and terminating plug. We have a sparky, that will sort out the power, but 13A plugged dimmers are preferred, as we will have a separate 4x 13amp socket power board, just for the lighting. If anyone would like to volunteer to run the lighting, we would be very grateful. John.
|
|
|
Post by John Bell on May 23, 2006 7:17:44 GMT 1
In case I am not able to get hold of the dimmers and controller, I have purchased another Ryger DX403-Pro controller and an ABS 6U rack, to house all 4x Ryger controllers. I managed to get the 2x half rack DX403's into the bottom of the rack without a frame, leaving air gaps around all 4 controllers. I have also purchased 2 more PAR56 cans, so that I can use 14 across the trussing, plus 4 either side on stage. I can now ditch the Footster, or use it to switch the stage flood lights during changes. John.
|
|